GET UP TO 30% OFF
Details
RaceFlux 120-Degree Push-Lock Hose End Fitting
Starting at $15.90
Part #
PL-120-XX
Part # PL-120-XX
Push on barbed fittings are for use with soft rubber hose or "sockeless" hose. Hose and fittings are easy to install: they simply push on with some heat and lubricant, and "lock" in place. The hose will not slide off the fitting easily because it compresses on the fitting as pressure increases. Hose clamps, such as worm clamps or Oetiker clamps, are required to ensure the hose does not back off.
Fittings are black anodized aluminum. The max tempeature and pressure rating for the assembled hose depend on the specifications of the hose. For fuel, be sure to use SAE J30 R9 (external to fuel tanks) or R10 (internal to fuel tanks) rated hose.
Features and Benefits
- Easy to assemble push on style barbed fitting for rubber fuel, transmission, and PCV hose, or "socketless" hose
- 120-degree fitting with AN thread
- Lightweight black anodized aluminum
- 36% lighter than traditional screw-type line fittings
| Part # | PL-120-XX |
|---|---|
| Brand | RaceFlux |
| Color | Black |
| Primary Material | 6061-T6 aluminum |
| Finish | Type II Anodized |
| Fitting Angle | 120° |
| Port A Type | Hose Barb Smooth |
| Port B Type | AN Flare Female 37º JIC |
| Connection B Gender | N/A |
| Maximum Operating Temperature | 500°F (260°C) |
| Minimum Operating Temperature | -40°F (-40°C) |
| Maximum Operating Pressure | 300 psi (20.68 bar) |
| Lock Ring Material | Stainless steel |
| Swivel | None on installation only |
| Applications | Breather and vent lines Fuel (in-tank) Fuel (outside of tank) Gauge and sensor lines Vacuum lines Other oil water and air systems |
| Fluid Compatibility | Air and gas Alcohol Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitrous Oxide Racing fuels Transmission fluid Vacuum Water |
Write Your Own Review
Customers Also Bought
