RaceFlux 60-Degree Push-On Hose End Fitting
Push on barbed fittings are for use with soft rubber hose or "sockeless" hose. Hose and fittings are easy to install: they simply push on with some heat and lubricant, and "lock" in place. The hose will not slide off the fitting easily because it compresses on the fitting as pressure increases. Hose clamps, such as worm clamps or Oetiker clamps, are required to ensure the hose does not back off.
Fittings are black anodized aluminum. The max tempeature and pressure rating for the assembled hose depend on the specifications of the hose. For fuel, be sure to use SAE J30 R9 (external to fuel tanks) or R10 (internal to fuel tanks) rated hose.
Features and Benefits
- Easy to assemble push on style barbed fitting for rubber fuel, transmission, and PCV hose, or "socketless" hose
- 60-degree fitting with AN thread
- Lightweight black anodized aluminum
- 36% lighter than traditional screw-type line fittings
|Port A Type||Hose Barb|
|Port B Type||AN Flare Female|
|Finish||MIL-A-8625 Type II anodized|
|Primary Material||6061-T6 aluminum|
|Lock Ring Material||Stainless steel|
|Maximum Operating Pressure||300 psi (20.68 bar)|
|Maximum Temperature Rating||302°F (150°C)|
|Minimum Temperature Rating||-40°F (-40°C)|