RaceFlux 90-Degree Push-Lock Hose End Fitting
Push lock barbed fittings are for use with soft rubber hose or "sockeless" hose. Hose and fittings are easy to install: they simply push on with some heat and lubricant, and "lock" in place. The hose will not slide off the fitting easily because it compresses on the fitting as pressure increases. Hose clamps, such as worm clamps or Oetiker clamps, are required to ensure the hose does not back off.
Fittings are black anodized aluminum. The max tempeature and pressure rating for the assembled hose depend on the specifications of the hose. For fuel, be sure to use SAE J30 R9 (external to fuel tanks) or R10 (internal to fuel tanks) rated hose.
Features and Benefits
- Easy to assemble push lock style barbed fitting for rubber fuel, transmission, and PCV hose, or "socketless" hose
- 90-degree fitting with AN thread
- Lightweight black anodized aluminum
- 36% lighter than traditional screw-type line fittings
|Port A Type||Hose Barb|
|Port B Type||AN Flare Female, 37º JIC|
|Connection B Gender||N/A|
|Finish||Type II Anodized|
|Swivel||None, on installation only|
|Maximum Operating Pressure||250 psi (17.24 bar)|
|Maximum Temperature Rating||302°F (150°C)|
|Minimum Temperature Rating||-40°F (-40°C)|