GET UP TO 30% OFF
Details
Adel Cushioned Mounting Clamps for Hose and Tubing, 1.00" ID, Stainless Steel
$1.73
In stock
Ships Today
Ships Today
Part #
HCP-2016
- Minimum order quantity is 5 items per size
Part # HCP-2016
These stainless steeel cushion clamps (also known as Adel clamps) help organize hose, tubing or wiring and position them out of harm's way.
Specifications
- Manufactured from 304 stainless steel for high strength and corrosion resistance
- Black rubber EPDM cushion protects hoses and tubing
- Band width is 12mm (0.47 in)
- 17/64" (6.7mm) mounting hole diameter, suitable for up to 1/4" or 6mm screws
- Lower hole is slotted for easy install and additional size adjustment
- -40° to 302°F (-40°C to 150°C) operating temperature range
Applications
| Part # | Clamp ID | Fits Hose Size |
| HCP-2004 | 1/4" (6.4mm) | -3AN 0.14" ID PTFE braided Hose |
| HCP-2006 | 3/8" (9.5mm) | -4AN 0.19" ID PTFE braided Hose |
| HCP-2008 | 1/2" (12.7mm) | -4AN braided hose and most 1/4" ID hose |
| HCP-2010 | 5/8" (15.9mm) | -6AN braided hose and most 3/8" ID hose |
| HCP-2012 | 3/4" (19.1mm) | -8AN braided hose and most 1/2" ID hose |
| HCP-2014 | 7/8" (22.2mm) | -10AN braided hose and most 5/8" ID hose |
| HCP-2016 | 1" (25.4mm) | -12AN braided hose and most 3/4" ID hose |
| HCP-2020 | 1-1/4" (31.8mm) | -16AN braided hose and most 1" ID hose |
Note: If using a heat sleeve, use a larger clamp size, depending on the thickness of the sleeve.
| Part # | HCP-2016 |
|---|---|
| Size | N/A |
| Fits Max Hose Size | -12AN |
| Clamp I.D. | 1" fits -12AN hose |
| Inner Diameter (I.D.) | 1" |
| Primary Material | Stainless steel |
| Finish | Plain |
| Clamp Cushion Material | EPDM |
| Minimum Operating Temperature | -40°F (-40°C) |
| Maximum Operating Temperature | 302°F (150°C) |
| Screw Hole ID | 17/64" (6.75mm) |
| Brand | RaceFlux |
Write Your Own Review
