GET UP TO 30% OFF
Details
RaceFlux AN 90-degree Bulkhead Adapter Fitting
Starting at $7.90
In stock
Part #
BMM-090-XX
Part # BMM-090-XX
-
RaceFlux's anodized aluminum bulkhead fittings allow lines to pass safely and securely through firewalls and body panels. Each bulkhead fitting requires one aluminum AN nut (sold separately). Optional PTFE washers (sold separately) may be used to create a water-tight seal and protect panels from damage.
- Connect lines safely through firewalls and body work panels
- 37-degree JIC AN male flare
- Lightweight 6061-T6 CNC-machined aluminum construction
- Black anodized finish for durability
- Requires one AN nut (sold separately)
- PTFE seals are optional and sold separately
Size | Side A (Through Bulkhead) Length | Side B Length | Hole Diameter |
---|---|---|---|
-3AN | 1" (26 mm) | 0.56" (14 mm) | 0.13” (3 mm) |
-4AN | 1.11" (28 mm) | 0.54" (14 mm) | 0.17” (4 mm) |
-6AN | 1.18" (30 mm) | 0.57" (15 mm) | 0.29” (7 mm) |
-8AN | 1.37" (35 mm) | 0.65" (17 mm) | 0.40" (10 mm) |
-10AN | 1.52" (39 mm) | 0.88" (22 mm) | 0.87” (22 mm) |
-12AN | 1.69" (43 mm) | 1.09" (28 mm) | 1.06” (27 mm) |
Fitting Angle | 90° |
---|---|
Port A Type | AN Flare Male, 37º JIC |
Port B Type | AN Flare Male, 37º JIC |
Connection B Gender | N/A |
Finish | Type II Anodized |
Color | Black |
Primary Material | 6061-T6 aluminum |
Swivel | None, on installation only |
Maximum Operating Pressure | 1000 psi (68.94 bar) |
Maximum Temperature Rating | 500°F (260°C) |
Minimum Temperature Rating | -40°F (-40°C) |
Fluid Compatibility | Air and gas Alcohol Brake Fluid Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitromethane Nitrous Oxide Power Steering Fluid Racing fuels Transmission fluid Vacuum Water |
Applications | Breather and vent lines Fuel (in-tank) Fuel (outside of tank) Gauge and sensor lines High temperature applications Hydraulics, low pressure (return lines) Other oil, water, and air systems Vacuum lines |
Manufacturer | RaceFlux |
Write Your Own Review