GET UP TO 30% OFF
Details
Fire-Retardant Silicone Heat Shrink Seal, -6AN to -8AN Hoses, 2.5" Length
$1.99
In stock
Ships Tomorrow
Ships Tomorrow
Part #
HHS-1025-64
- Use to create a dustproof and waterproof seal on the ends of silicone-fiberglass heat protection sleeving
- Fits -6AN and -8AN hoses with silicone-fiberglass heat sleeving installed
- Fire retardant and resistant to most chemicals and automotive fluids
- -58°F (-50°C) to 392°F (200°C) operating temp range
Part # HHS-1025-64
RaceFlux silicone heat shrink seals are used to create a dustproof and waterproof seal on the ends of our silicone-fiberglass heat protection sleeves (HS1 series heat sleeves).
To install, slide over the hose and heat sleeving before installing the hose ends. Center the sleeve and then heat with a heat gun or blow dryer to shrink.
Specifications
- 25mm unshrunk I.D. fits -6AN and -8AN hoses with silicone-fiberglass heat sleeving installed
- Shrinks down to a 15mm I.D. when heated
- Fire retardant and resistant to most chemicals and automotive fluids
- -58°F (-50°C) minimum continuous operating temps
- 392°F (200°C) maximum continuous operating temps
- Temperature required to shrink sleeving: 194°F - 338°F (90°C - 170°C)
- Wall thickness before shrinking: 1.0mm +/- 0.2mm
- Wall thickness after shrinking: 1.7mm +/- 0.1mm
| Part # | HHS-1025-64 |
|---|---|
| Outer Layer Material | Silicone |
| Maximum Continuous Temperature Rating | 392°F (200°C) |
| Maximum Intermittent Temperature | 1 000°F (538°C) |
| Minimum Operating Temperature | -58°F (-50°C) |
| Inner Diameter (I.D.) | .98" (25mm) |
| Outer Diameter (O.D.) | 1.06" (27mm) |
| Heat Shield Length | 2.5" (64mm) |
| Fits Max Hose Size | -6AN -8AN |
| Brand | RaceFlux |
Write Your Own Review
Customers Also Bought
Related Products
