GET UP TO 30% OFF
Details
Fire-Retardant Silicone Heat Shrink Seals for AN Hose Assemblies
Starting at $1.49
Part #
HHS-10XX
- Use to create a dustproof and waterproof seal on the ends of silicone-fiberglass heat protection sleeving
- Fire retardant and resistant to most chemicals and automotive fluids
- -58°F (-50°C) to 392°F (200°C) operating temp range
Part # HHS-10XX
RaceFlux silicone heat shrink seals are used to create a dustproof and waterproof seal on the ends of our silicone-fiberglass heat protection sleeves (HS1 series heat sleeves).
To install, slide over the hose and heat sleeving before installing the hose ends. Center the sleeve and then heat with a heat gun or blow dryer to shrink.
Specifications
- Fire retardant and resistant to most chemicals and automotive fluids
- -58°F (-50°C) minimum continuous operating temps
- 392°F (200°C) maximum continuous operating temps
- Temperature required to shrink sleeving: 194°F - 338°F (90°C - 170°C)
| Part Number | For AN Hose | I.D. Pre-Shrink | I.D. Post-Shrink | Thickness Pre-Shrink | Thickness Post-Shrink | Length Each |
| HHS-1018-64 | -4AN | 20mm | 13mm | 1.0mm +/- 0.2mm | 1.7mm +/- 0.1mm | 2.5" (64mm) |
| HHS-1025-64 | -6AN, -8AN | 25mm | 15mm | 1.0mm +/- 0.2mm | 1.7mm +/- 0.1mm | 2.5" (64mm) |
| HHS-1035-76 | -10AN, -12AN | 35mm | 20mm | 1.3mm +/- 0.3mm | 2.5mm +/- 0.3mm | 3.0" (76mm) |
| Part # | HHS-10XX |
|---|---|
| Outer Layer Material | Silicone |
| Maximum Continuous Temperature Rating | 392°F (200°C) |
| Maximum Intermittent Temperature | 1 000°F (538°C) |
| Minimum Operating Temperature | -58°F (-50°C) |
| Brand | RaceFlux |
Write Your Own Review
Customers Also Bought
Related Products
