GET UP TO 30% OFF
Details
RaceFlux 3/8" Male Push Lock Barb Y-Adapter Fitting
$22.90
In stock
Ships Today
Ships Today
Part #
YPL-06-06-06
Part # YPL-06-06-06
Push-lock hose end fittings are for use with soft rubber hose or "socketless" hose. Hose and fittings are easy to install: they simply push on with some heat and lubricant, and "lock" in place.
Fittings are black anodized aluminum. Assembled hose is rated for up to 300°F and 150-300 psi (depending on hose size) when used with RaceFlux PH series hoses. Hose clamps are required to ensure the hose does not back off if used at pressures of 10 psi or higher.
These fittings are also useful for converting AN convections to standard rubber hose and vice-versa.
Features and Benefits
- Easy to assemble push-lock style fitting for RaceFlux PH series hose, or other rubber fuel, transmission, and PCV hose.
- Lightweight black anodized aluminum.
- 36% lighter than traditional screw-type line fittings.
| Part # | YPL-06-06-06 |
|---|---|
| Brand | RaceFlux |
| Compatible Fittings | PL (Push-Lock Barb) |
| Compatible Hose | PH (Push-Lock) |
| Color | Black |
| Finish | Type II Anodized |
| Size | 3/8" Hose Barb to 2x 3/8" Hose Barb |
| Fitting Angle | Y (Wye) |
| Connection Type | Hose Barb Push-Lock |
| Connection A Type | Hose Barb Push-Lock |
| Connection A Size | 3/8" |
| Connection A Gender | M |
| Connection B Type | Hose Barb Push-Lock |
| Connection B Size | 3/8" |
| Connection B Gender | M |
| Tee Connection Type | Hose Barb Push-Lock |
| Tee Connection Size | 3/8" |
| Tee Connection Gender | M |
| Maximum Operating Temperature | 500°F (260°C) |
| Minimum Operating Temperature | -60°F (-51°C) |
| Maximum Operating Pressure | 300 psi (20.68 bar) |
| Swivel | None on installation only |
| Applications | Breather and vent lines Fuel (in-tank) Fuel (outside of tank) Gauge and sensor lines High temperature applications Hydraulics: low pressure (return lines) Vacuum lines Other oil water and air systems |
| Fluid Compatibility | Air Alcohol Brake Fluid Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitrous Oxide Power Steering Fluid Racing fuels Transmission fluid Vacuum Water |
| Standards & Certifications | Anodizing per ISO 7599 |
Write Your Own Review
