GET UP TO 30% OFF
Details
Hose Barb to SAE J2044 Female Quick Connect, 45-Degree
Part #
BQF-045
- OEM style J2044 standard quick connect adapter fittings to hose barb adapters for use with rubber hose
- 45-degree angle
- Made from lightweight molded plastic
- FKM O-rings for compatibility with all fuels, coolant, water, crankcase vapors, etc.
Part # BQF-045
Modern vehicles commonly follow the SAE J2044 standard for quick connect fittings in applications such as air breather lines, vacuum lines, PCV lines, coolant lines, and Electronic Fuel Injection (EFI) fuel lines.
These OEM style female SAE J2044 quick release fittings will connect to male J2044 quick connect barbs and adapt them to a hose barb for use with rubber hoses.
To determine the size needed, measure the outer diameter of the male mating barb and refer to the diagram below.
Fuel systems commonly use the 5/16" and 3/8" size quick connect fittings. Most GM vehicles use M10 (9.89mm) quick release fittings for PCV breather lines. Ford and Dodge commonly use the 5/8" (15.82mm) quick release fittings for PCV breather lines. Measure your fittings to confirm the exact size needed before ordering.
Features and Benefits
- Adapter fitting in female SAE J2044 standard to male hose barb for rubber hoses
- 45-degree angle
- Single or double button release, depending on size
- Lightweight black molded plastic construction
- Viton (FKM) O-rings for compatibility with fuel in addition to water, coolant, crankcase vapors, etc.
| Part # | BQF-045 |
|---|---|
| Brand | RaceFlux |
| Fitting Series | Smooth Barb (B Series) |
| Hose Series | Push-Lock (PH Series) |
| Color | Black |
| Primary Material | Molded Plastic |
| Finish | Plain |
| Fitting Angle | 45° |
| Connection Type | Hose Barb Push-Lock Hose Barb Smooth Quick-Connect Female |
| Port A Type | Hose Barb Smooth |
| Connection A Gender | Male |
| Port B Type | Quick-Connect Female |
| Connection B Gender | Female |
| Maximum Operating Temperature | 302°F (150°C) |
| Minimum Operating Temperature | -40°F (-40°C) |
| Maximum Operating Pressure | 100 psi (6.89 bar) |
| O-Ring Material | FKM (Viton) |
| Swivel | None on installation only |
| Applications | Breather and vent lines Fuel (outside of tank) Vacuum lines Coolant & water lines |
| Fluid Compatibility | Air and gas Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Power Steering Fluid Transmission fluid Vacuum Water |
| Standards & Certifications | Connector per SAE J2044 |
Write Your Own Review
Customers Also Bought
