on all USA orders!

RaceFlux Lightweight Nylon Braided Viton Hose for Fuel and Oil

100% of 100

Sold by the foot
Part #
Grouped product items
Part #SizePriceEst. Ship Date Length (ft)
Part #: RH1-06Size : -6AN Price:
Est. Ship Date: Tomorrow Qty:
Part #: RH1-08Size : -8AN Price:
Est. Ship Date: Tomorrow Qty:
Part #: RH1-10Size : -10AN Price:
Est. Ship Date: Tomorrow Qty:
Part #: RH1-12Size : -12AN Price:
Est. Ship Date: Tomorrow Qty:
Part # RH1

RaceFlux's RH1 lightweight racing hose is 33% lighter than stainless braided hose and much easier to assemble and work with. This 4-layer hose is SAE J30 R9 rated and features a Viton Fluoroelastomer (FKM) inner layer for compatibility with nearly all automotive fluids including fuel, engine oil, gear oil, transmission fluid, coolants, water, air and vacuum. 

(Click to Enlarge)

Certified for use with racing fuels, ethanol-based fuels (E85+), diesels/bio-diesels, methanol, and ethanol/gasoline mixtures. This hose will not deteriorate, dry, harden, or permeate fuel (emit fuel vapor) with the presence of ethanol in gasoline. 

This hose is NHRA approved and can be found on the NHRA approved product list.

For use with RaceFlux brand and other traditional AN fittings. Sold by the foot. 

Features and Benefits

  • Availble in -6AN, 8AN, -10AN and -12AN sizes
  • NHRA Approved
  • Color is solid black or black with gray stripes, depending on current inventory
  • SAE J30 R9 rating
  • 33% lighter than traditional stainless steel braided hose
  • Lightweight, abrasion-resistant Nylon outer cover
  • Smooth bore Viton FKM fluroeslastomer rubber inner layer composed of vinylidene fluoride (VDF), hexafluoropropylene (HFP) and tetrafluoroethylene (TFE) with a high fluorine content for excellent chemical resistance
  • Reinforced with a lightweight embedded stainless steel inner braid for use in vacuum applications
  • -40°F (-40°C) to 302°F (150°C) operating temperature
  • 300 PSI max operating pressure
  • 1,000 PSI burst pressure
  • For use with traditional reusable AN fittings (not for use with push-on style barbed fittings)
  • Note: This hose should not be submerged in fuel or used inside of fuel tanks
Hose Size Inner Diameter Outer Diameter
-6AN 0.35'' 0.55''
-8AN 0.45'' 0.65''
-10AN 0.62'' 0.79''
-12AN 0.70'' 0.96''

















More Information
Drop Ship ItemNo
Special Order ItemNo
Hose StyleAN Standard
ApplicationsBreather and vent lines, Fuel (outside of tank), Gauge and sensor lines, Other oil, water, and air systems, Vacuum lines
CertificationsSAE J30 R9
Fluid CompatibilityAir and gas, Alcohol, Coolants, Engine oil, Ethanol-based fuels (E85+), Ethanol/gasoline mixtures, Gear oil, Methanol, Nitrous Oxide, Power Steering Fluid, Racing fuels, Transmission fluid, Vacuum, Water
Outer CoverAbrasion-Resistant Nylon Braid
ReinforcementStainless steel braid
Inner Bore MaterialViton Fluoroelastomer (FKM)
ColorBlack with Gray Trace
Size-12AN Male to -12AN Female
Minimum Temperature Rating-30°F (-34°C)
Maximum Temperature Rating302°F (150°C)
Maximum Operating Pressure300 psi (20.68 bar)
Burst Pressure1000 psi (68.94 bar)
Write Your Own Review
You're reviewing:RaceFlux Lightweight Nylon Braided Viton Hose for Fuel and Oil
Your Rating