RaceFlux Customizable Single Ear Oetiker Hose Clamp Kit
Click the "Customize and Add to Cart" button and assemble your own hose clamp kit that best suits your application!
These stainless steel stepless single ear clamps are an excellent addition to any push-lock hose assembly to properly maintain the seal through changes in pressure and temperature. After a special tool is used to compress the "ear" (sold separately), constant pressure is applied to squeeze the hose over the barb. Once installed, the clamp will never have to be re-tightened, making it superior to common worm-drive clamps. These clamps have 7mm wide bands, and are available in packs of ten for 1/4'', 5/16'', 3/8'', 1/2'', 5/8'', and 3/4'' rubber push-lock or socketless hose. Please reference sizing chart below.
Ear clamps, single or 2-ear, require a special tool to press the ear and tighten the clamp, which fastens a barbed fitting to push-lock or socketless hose. RaceFlux's ear clamp tool is made from quality, corrosion-resistant chrome vanadium steel. Its slim head design allows easy access to confined areas, and the tool's chamfered teeth will not damage the clamp as it smoothly presses the ear.
- Stainless steel for protection against corrosion
- Clamp style: Stepless single ear
- Band Width: 7mm
- Strong chrome vanadium steel
- For single or 2-ear clamps
- Slim head design
|Part No.||Max Clamp ID||Min Clamp ID||Recommended Hose ID|
|HCP-3145||14.5 mm||12 mm||1/4'' to 5/16''|
|HCP-3153||15.3 mm||12.8 mm||5/16'', RaceFlux RH8-05|
|HCP-3185||18.5 mm||15.5 mm||3/8'', RaceFlux RH8-06|
|HCP-3210||21 mm||18 mm||1/2'', RaceFlux RH8-08|
|HCP-3226||22.6 mm||19 mm||1/2''|
|HCP-3256||25.6 mm||22.6 mm||5/8'', RaceFlux RH8-10|
|HCP-3296||29.6 mm||26.6 mm||3/4'', RaceFlux RH8-12|
|Drop Ship Item|| |
|Special Order Item|| |
|Primary Material|| |