GET UP TO 30% OFF
Details
-
RaceFlux's anodized aluminum bulkhead fittings allow lines to pass safely and securely through firewalls and body panels. Each bulkhead fitting requires one aluminum AN nut (sold separately). Optional PTFE washers (sold separately) may be used to create a water-tight seal and protect panels from damage.
- Connect lines safely through firewalls and body work panels
- 37-degree JIC AN male flare
- Lightweight 6061-T6 CNC-machined aluminum construction
- Black anodized finish for durability
- Requires one AN nut (sold separately)
- PTFE seals are optional and sold separately
Size | Side A (Through Bulkhead) Length | Side B Length | Hole Diameter |
---|---|---|---|
-3AN | 1.15" (29 mm) | 0.48" (12 mm) | 0.375” (9.5 mm) |
-4AN | 1.24" (31 mm) | 0.55" (14 mm) | 0.4375” (11 mm) |
-6AN | 1.32" (34 mm) | 0.56" (14 mm) | 0.5625” (14 mm) |
-8AN | 1.46" (37 mm) | 0.66" (17 mm) | 0.75" (19 mm) |
-10AN | 1.63" (41 mm) | 0.77" (20 mm) | 0.875” (22 mm) |
-12AN | 1.77" (45 mm) | 0.86" (22 mm) | 1.0625” (27 mm) |
Part # | BMM-XX |
---|---|
Brand | RaceFlux |
Color | Black |
Finish | Type II Anodized |
Fitting Angle | Straight |
Connection Type | AN Flare 37º JIC |
Connection A Type | AN Flare |
Connection A Gender | M |
Connection B Type | AN Flare |
Connection B Gender | M |
Maximum Operating Temperature | 500°F (260°C) |
Minimum Operating Temperature | -40°F (-40°C) |
Maximum Operating Pressure | 1000 psi (68.94 bar) |
Swivel | None on installation only |
Applications | Breather and vent lines Fuel (in-tank) Fuel (outside of tank) Gauge and sensor lines High temperature applications Hydraulics: low pressure (return lines) Vacuum lines Other oil water and air systems |
Fluid Compatibility | Air and gas Alcohol Brake Fluid Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitrous Oxide Power Steering Fluid Racing fuels Transmission fluid Vacuum Water |
Write Your Own Review
You May Also Like