GET UP TO 30% OFF
Details
365-DAY RETURNS
Details
FREE SHIPPING
on all USA orders!
Details

RaceFlux Viton Rubber SAE J30 R9 Push-Lock Fuel Hose, 5/16'' ID, sold by the foot

$4.82


Sold by the foot
 Out of stock
In stock by Fri, Nov 19
Part #
RH8-05

Note: Sold by the foot

Part # RH8-05

RaceFlux's RH8 Viton rubber push-lock hose makes plumbing your vehicle easy. This SAE J30 R9 rated hose features a Viton Fluoroelastomer (FKM) inner layer for compatibility with nearly all automotive fluids including fuel, engine oil, gear oil, transmission fluid, coolants, water, and air. An embedded aramid fiber braid serves as reinforcement while an outer layer made from Epichlorohydrin (ECO) rubber gives it a much higher maximum operating temperature than Nitrile rubber. 

Certified for use with racing fuels, ethanol-based fuels (E85+), diesels/bio-diesels, methanol, and ethanol/gasoline mixtures. This hose will not deteriorate, dry, harden, or permeate fuel (emit fuel vapor) with the presence of ethanol in gasoline. 

May be used with RaceFlux and other brand push-lock or hose barb fittings. 

Please note: Hose clamps (i.e. worm-gear or Oetiker ear clamps) are REQUIRED when:

  1. Using smooth hose barb fittings
  2. Using push-lock fittings with an operating pressure above 10 psi

Failure to install a hose clamp when necessary will likely result in failure and/or serious damage (i.e. a hose backing off the fitting). 

Sold by the foot. Maximum continuous length is 32.8 feet (10 meters)


Features and Benefits

  • Color is solid black
  • SAE J30 R9 rating
  • Epichlorohydrin (ECO) rubber outer cover
  • Smooth bore Viton FKM fluroeslastomer rubber inner layer composed of vinylidene fluoride (VDF), hexafluoropropylene (HFP) and tetrafluoroethylene (TFE) with a high fluorine content for excellent chemical resistance
  • Reinforced with an embedded aramid fiber braid
  • -40°F (-40°C) to 300°F (150°C) operating temperature
  • 100 PSI max operating pressure
  • For use with push-lock style fittings (not for use with re-usable "cutter" style or crimp AN hose end fittings)
  • Note: This hose should NOT be submerged in fuel or used inside of fuel tanks
  •  Note: Not recommended for vacuum applications
  • Note: A hose clamp is required when using smooth hose barb fittings. Hose clamps are recommended when using push-lock fittings and required if operating pressure is above 10 psi.

Hose Size

Hose Inner Diameter Outer Diameter
RH8-05 0.31'' 0.54''
RH8-06 0.38'' 0.60''
Specifications
Drop Ship Item
No
Special Order Item
No
Hose Style
Push-lock
Applications
Breather and vent lines
Fuel (in-tank)
Fuel (outside of tank)
Gauge and sensor lines
Other oil
water
and air systems
Certifications
SAE J30 R9
Fluid Compatibility
Air and gas
Alcohol
Coolants
Engine oil
Ethanol-based fuels (E85+)
Ethanol/gasoline mixtures
Gear oil
Methanol
Nitrous Oxide
Power Steering Fluid
Racing fuels
Transmission fluid
Water
Conductive (Anti-Static)
Yes
Outer Cover
Epichlorohydrin
Reinforcement
Aramid Fiber
Inner Bore Material
Viton Fluoroelastomer (FKM)
Color
Black
Hose Size
5/16" ID
Size
5/16" ID
Inner Diameter (I.D.)
0.31''
Outer Diameter (O.D.)
0.54''
Minimum Bend Radius
4.0" (101.6 mm)
Minimum Operating Temperature
-40°F (-40°C)
Maximum Operating Temperature
302°F (150°C)
Maximum Operating Pressure
100 psi (6.89 bar)
Vacuum Rating
18 in/Hg (60
955 Pa)
Burst Pressure
3000 psi (206.84 bar)
Manufacturer
RaceFlux
Write Your Own Review
You're reviewing:RaceFlux Viton Rubber SAE J30 R9 Push-Lock Fuel Hose, 5/16'' ID, sold by the foot
Your Rating